Skip to main content

Posts

Showing posts from September, 2018

Cisco 7942 Factory Reset

Follow below simple steps to perform factory reset your Cisco 7942 IP Phone

Unplug network cable from the back of phone and then plug network cable back in. The phone will begin its power up process.Press and Hold # Key from one finger when you are plugging network cable back in and before Speaker Button flash on and off keep holding # KeyRelease # Key and press 123456789*0#   If you press keys unsequencely or make delay to release or hold # Key phone will boot normally hence make sure to press these steps carefully and if phone boot normally you have to perform above steps again. Below is Video guide to help you to perform factory reset on cisco phone.


https://youtu.be/UY71rBVb12k

Enable Administrator Account in Windows 10

By default administrator user account is hidden in windows 10 that you have to enable by running command, here is this post I will tell you the best and simplest way to enable admin account using command prompt.

Tap on Windows Key. or type CMD on search bar like this  Type CMD and simultaneously press Ctrl + Shift + Enter key. note all three keys should be press simultaneously Next window will pop up will ask you to accept press yes there will be admin command prompt , for example  Type command net user administrator /active:yes and hit enter. You will get message saying command completed successfully. You're done, after restart you will find option to login using administration user account.

Cisco 7942 Factory Reset to Default

Perform Factory reset on Cisco IP Phone 7942 - Video Guide




Newsletter

Get expert tips and email inspiration biweekly!


Follow on Facebook Techorient Follow on Twitter TechorientFollow on YouTube Techorient